Safety inspection
A door that opens is not the same as a door that stops when it should.
- Balance, cables, and springs
- Photo eyes and auto-reverse
- Free with a completed repair or service

A garage door safety inspection is a pass over the parts that can drop the door or pin someone under it. Springs and cables hold the weight. The photo eyes and the auto-reverse are what stop the door when a person, a pet, or a car is in the way. We check those, and we check that the door is balanced so the opener is not muscling a heavy slab.
The inspection is included when a repair or a service is actually completed. It is not a standalone free visit with no work attached. Say you want it when you book a maintenance visit, a tune-up, or a repair. If we find a frayed cable or a spring with a gap, that becomes its own quote before anyone changes a part. Sensor problems have their own page under sensor repair. The county list lives on the service-area page.
Want the safety items checked?
Book a repair or a maintenance visit and ask for the inspection. It is included.
What the inspection covers
Five checks. You hear what passed and what did not.
Balance by hand
With the opener released, the door should stay about halfway. A door that falls or rises on its own is a spring problem, and we stop there.
Cables and bottom brackets
Frayed strands, a cable off the drum, and brackets pulling out of the bottom section. Those are the parts that drop a door.
Springs
A gap in a torsion coil, or extension springs with no safety cable through them. Rust pits get pointed out, especially near the beach.
Photo eyes and auto-reverse
Eyes aligned and clear, then a reverse test so the door comes back up when it meets an obstruction. We do not raise the force to hide a binding door.
When people ask for this
After a repair
The inspection rides along with the completed job. Mention it so it is on the work order.
Once a year
Paired with maintenance. Coastal doors, and doors that are the main way into the house, are the ones worth doing on a schedule.
Before a car or a child incident repeats
A door that already bumped a car, or that a child has ducked under, should be tested before it happens again.
Signs the safety gear is not doing its job
Stop using the opener and call if:
- The door only closes when you hold the buttonThe photo eyes are blocked, misaimed, or the wiring is open. Holding the button bypasses them.
- It reverses with nothing in the wayEyes looking at each other wrong, or sun in the lens. Also a limit set too far into the floor.
- It does not reverse when you stop it with a boardThe force is set too high, or the door is binding. That is the test that matters.
- A cable looks frayedOne broken strand is enough to retire that cable. Do not keep cycling it.
- Extension springs have no cable through the centerIf one breaks, the spring can fly. A safety cable contains it. We add them when they are missing.
Safety first. Do not stand under a door to test the reverse with your body. Use a roll of paper towels or a board. If a cable is loose or a spring is broken, leave the door shut and unplug the opener.
Why Wolf for the inspection
Included with the job
Free when a repair or service is completed. Ask at booking.
Findings in plain words
What passed, what failed, and what can wait. No part gets changed without a price.
Repair coupon still applies
$25 off the repair if that is the job you booked.
Any hour
A door that will not close at night is an inspection and a repair, not a morning appointment.
