Commercial openers
Push the button, and nothing happens?
- Door checked before the motor
- Controls & safety devices
- Scope confirmed first
Commercial garage door opener repair starts at the door, not the motor. Operators on business doors are often blamed for problems that begin with a worn spring, a binding roller or a bent track, which makes the door heavier than the operator was set up to move. Before we touch the motor, we release the door and check that it moves and balances properly by hand.
When the opener is the problem, it's usually something specific: a worn drive part, limits that have drifted so the door stops short or slams, a control station or remote that no longer signals, or a safety device that keeps reversing the door. We trace the fault, explain it in plain terms and give you the price before any repair.
Commercial openers come in more varieties than residential ones, so call with the brand and model from the label if you can see it. We'll tell you whether it's a unit we can work on before we schedule. For problems with the door itself, see commercial door repair.
Bay door won't open for deliveries?
Call any hour. Read us the opener label if you can.
Commercial opener work
Diagnosis first, then repair when it makes sense.
Troubleshooting
Power, controls, limits and the door's own balance checked to find the actual fault.
Drive and limit repair
Worn drive parts addressed and travel limits reset so the door stops where it should.
Controls and remotes
Push-button stations, remotes and keypads tested, repaired or reprogrammed.
Safety device checks
Photo-eyes and reversing devices aligned and tested before we leave.
Repair or replace the opener
Repair makes sense when
The motor is sound, parts are available, and the fault is a control, limit, sensor or drive component.
Replacement makes sense when
The unit is obsolete, parts can't be found, or repairs keep stacking up on a door that runs all day.
Signs a commercial opener needs service
Call before a slow-down becomes a shut-down:
- Motor runs but the door doesn't moveA drive problem, or a door too heavy for the opener to lift.
- Door stops short or overshootsLimits have drifted out of adjustment.
- Door reverses for no clear reasonSafety devices out of line, or force set incorrectly.
- Control station unresponsiveA wiring, switch or board issue.
- New noises from the motorWorn parts that will eventually fail under load.
Safety first. Don't bypass safety devices or hold a control button to force a door down. On larger doors, an opener running against a broken spring or a jammed track can do real damage. Shut it off and call.
Why businesses call Wolf for openers
Door checked first
Balance and track are checked before the operator takes the blame.
Safety devices tested
Reversing and photo-eyes checked on every visit.
Open 24/7
After-hours failures get an answer.
Straight scope
We tell you up front if a unit is outside what we service.
